제품 소개폴리아스파르틱 플로어 코팅

높은 마멸 저항을 코팅하는 무-용매 폴리아스파르틱 원내대표

높은 마멸 저항을 코팅하는 무-용매 폴리아스파르틱 원내대표

  • 높은 마멸 저항을 코팅하는 무-용매 폴리아스파르틱 원내대표
높은 마멸 저항을 코팅하는 무-용매 폴리아스파르틱 원내대표
제품 상세 정보:
브랜드 이름: PERFLEX
인증: CE/ROHS/ISO9001
모델 번호: PXF-500 / 시카 315
결제 및 배송 조건:
최소 주문 수량: 200 들통
포장 세부 사항: 들통 당 5 L/10L/20L
배달 시간: 약 7 일
공급 능력: 매년 20000 톤
접촉
상세 제품 설명
재료: 폴리아스파르틱 수지 + 이소시아네이트 경화제 섞음 비율: 한 : 비 : C= 100 : 20 : 50
색: 투명합니다 특징: 좋은 결합 | 내후성
패키지: 5L | 10L | 20L / 들통 애플리케이션: 공원 | 길 | 정원 | 수영장 바닥
하이 라이트:

무-용매 폴리아스파르틱 플로어 코팅

,

높은 마멸 저항을 코팅하는 폴리아스파르틱 바닥

,

5L 폴리아스파르틱 플로어 코팅

PF-100 Solvent Free High Abrasion Resistant Polyaspartic Floor Coating Anti-aging No-yellowing Mapei Replacement

 

 

INTRODUCTION: PXF-500 is a three-component reaction curing transparent floor coat made of polyaspartic resin, HDI hardener and organic micro bead materials, with special organic micro bead and multi-functional chemical, it can provide strong adhesion and substrate adhesion when overcoat on epoxy or polyurethane substrate, and super wear and scratch resistance of the coating layer. It’s has good anti- QUV properties, anti-aging and yellowing resistance and chemical resistance performance, the best choice for heavy duty vehicle flooring indoor or outdoor. 높은 마멸 저항을 코팅하는 무-용매 폴리아스파르틱 원내대표 0

 

FEATURE

1- Low maintenance
2- Excellent UV resistance
3- Low VOC-content, low odor
4- Durable, impermeable and seamless
5- Smooth glossy finish, optional slip resistant semi-gloss
 finish
6- Unique UV blocker technology provides superior
 ultraviolet light screening

높은 마멸 저항을 코팅하는 무-용매 폴리아스파르틱 원내대표 1

APPLICATION: Typically used in light to heavy-duty traffic areas

 

▪ Laboratories, Life Sciences, Pharmaceutical industries and Health Care industry.
▪ Education (e.g. Schools and Universities).
▪ Leisure & Culture (e.g. Museums, Stadiums).
▪ Retail (e.g. Shopping Malls).
▪ Manufacturing facilities and warehouses.

 

PHYSICAL PROPERTIES 

 

Part A Resin Part B Hardener
Appearance Transparent Appearance  Transparent
Viscosity 25 ℃ 1200mpas Viscosity 25 ℃ 12mpas
Specific gravity 25 ℃ 1.15 Specific gravity 25 ℃  
Solid content 99% Solid content  

 

Part D: Organic Micro Bead Materials

 

PROPERTIES AFTER CURING

7-day hardness Shore D 68
Abrasion (CS17 wheel 750g, 500r) / Mg 25
Elongation at break (%) 15
Tensile strength (MPA) 23
Concrete adhesion (MPA) 2.2
Acid resistance no change in 5% sulfuric acid
Alkali resistance no change in 10% sodium hydroxide
Impact resistance (1000g, 1m) Pass

 

 

CONSTRUCTION PARAMETERS 

 

- BLEND RATIO BY WEIGHT
 A :  B : D = 100 : 20 : 50
 

 - WORKING TIME

Temperature (℃) 25 30  
Mixed service life (min) 20 15  

 

- CONSTRUCTION CONDITIONS 
 

Construction amount: strictly control the amount in 0.05 ~ 0.1kg/m2 to avoid accumulation, otherwise the foaming is serious
Construction conditions:
Ambient temperature: 0 ℃ - 35 ℃, ambient humidity: ≤ 85%
Substrate temperature: must be more than 3 ℃ above air dew point temperature
Cleaning agent: Asparagus polyurea standard diluent
Note: this material has very high requirements for construction, and can only be operated after professional training of our company before use.

 

- DRY TIME AND RECOAT INTERVAL
Temperature (℃) : 25
Walking opening hours (HRS): 8
Vehicle opening hours (HRS) : 2

Recoat interval hours (HRS): 2

The above data is only for guidance, and the real curing time is highly related to the ambient temperature and humidity.

 

- SURFACE TREATMENT
Clean water to remove salt and other water-soluble contaminants.
Use proper detergent and degreaser to remove grease.
Clean and dry the surface before construction.
Pay attention to the painting interval between the primer and the construction.

 

STORAGE


Storage time: 12 months
Storage temperature: 5 ℃ - 35 ℃

 

PACKAGE


Part A: 3kg  |  Part B: 0.6kg | Part D: 1.4kg

 

연락처 세부 사항
CHANGSHA PERFLEX NOVEL MATERIALS CO.,LTD

담당자: Laura

회사에 직접 문의 보내기 (0 / 3000)

기타 제품

접촉

주소: 장샤. 후난 성 중국

공장 주소:Baofeng 공업 지대, Shashi 군, 류양 장샤 시, 후난 성 중국