원래 장소: | 중국 |
브랜드 이름: | PERFLEX |
인증: | CE | RoHS | GB/T19001-2016/ISO 9001:2015 |
모델 번호: | P-30 |
포장 세부 사항: | 플라스틱 두배의 튜브 | 용지함 / 조각 |
---|---|
배달 시간: | 7일입니다 |
공급 능력: | 20million 조각/년 |
재료: | Polyaspartic 수지 중합체 + 고급 안료 및 특별한 첨가물 | 분류: | 2개 성분 Polyaspartic 도와 주둥이로 파헤침 |
---|---|---|---|
이명: | 비 황변 주둥이로 파헤침 | 날씨 저항 도와 주둥이로 파헤침 | 도기 타일 주둥이로 파헤침 | 도와 실란트 | 색: | 반짝임 | 밝은 |
판매 수명: | 12개월 | 애플리케이션: | 도기 타일 | 대리석 | 돌 등 합동 충전물, 축복 |
포장: | 400ml/pcs의 Doubule 플라스틱 관 | 출현: | 매끄러운 풀 |
특징: | 반대로 곰팡이 | 얼룩 저항 | 방수 | 튼튼한 | 청소하게 쉬운 | 쉬운 그라우트로 굳히기 | 키워드: | 에폭시 도와 주둥이로 파헤침 | 에폭시 주둥이로 파헤침 | 가기 위하여 주둥이로 파헤침 준비하십시오 | 접착제를 타일을 붙이십시오 |
하이 라이트: | 요업 항균성 타일 그라우트,방습 항균성 타일 그라우트,에폭시 타일 줄눈 충전기 그라우트 |
POLYASPARTIC TILE GROUT P-30 | Non Yellowing | Weather Resistance | Stain Resistance
P-30 TDS Polyaspartic Grout.pdf Download
Please follow PERFLEX to Tile Grout 3.0 and 4.0 era.
No doubt that cartridge epoxy and polyaspartic tile grout will be trend in nearly future.
Perflex cartridge tile grout is more power, time and labor saving grouted by caulking gun, especially P-30 polypro is never discoloring.
Though it's pretty new and valuable grout in the market, the tilers who tried it all love it.
Perflex Polyaspartic Tile Grout P-30 is a two-component polyasparitc joint grout, made of high-tech polymer polyaspartic, isocyanate hardener, high-grade pigments and additives. It is a semi-fluid liquid, packed into two-component plastic cartridge packaging, it can easily operate by automatic caulking gun. It’s 100% solid content, zero VOC, non-toxic materials that can be cured under low temperature above -25℃.
1- Polyaspartic Tile Grout P-30 is super weather resistance and QUV resistance, the grout outdoor under the sunshine won't be chalking and the color won't be fading and yellowing forever.
2- Polyaspartic Tile Grout P-30 is slightly elastic film, it can endure more terrible temperature sticking firmly in the
ceramic tile seam, which avoid the grout peeling off and crack.
3- Polyaspartic Tile Grout P-30 is made of polyaspartic materials, it can be cured itself under the pretty low temperature even minus 35 degree, therefore P-30 is a products that do not being affected by temperature.
Excepting those particular feature, Polyaspartic Tile Grout P-30 has all features as epoxy tile grout P-20, like it has high bonding strength, excellent physical properties such as non-sagging, tear/scratch/wear resistance. After curing, it is super anti-mildew, anti-bacterial, stain resistance, waterproof, moisture-proof, colorful, durable, smooth as porcelain, hard as diamond, bright as crystal, easy to clean, etc. The construction is very simple and convenient.
Testing Item | Resin A | Hardener B |
Appearance | Semi-fluid liquid | Thixotropic paste |
Blend Ratio(by volume) | A : B = 1 : 1 | |
Odor Grade | 2 | |
Working time(25℃*min) | 20 min | |
Original Curing | 25℃*4h | |
Hardness(Shore D)≥ | 75 | |
Colloidal fluidity after blending | Thixotropic fluid | |
Bonding Strength | ≥6.0 | |
Wear Resistance (750 g.500 r)/g | 0.030 | |
Sagging after blending? | No sagging | |
Tensile Shear Strength/MPa | Standard condition | ≥5.0 |
High/low temperature switch. | ≥3.0 | |
Water absorbent 25℃24 hour(%) | <0.2 | |
Yellowing Resistance(168h)/ | 1 | |
Waterproof / 24h | No change | |
Chemical Resistance / 2h | No change | |
Stain Resistance (Vinegar, soy, oil)/ 1h | No change | |
Testing condition: 21-25℃,relative humidity 45-55%. Constructed by caulking gun. |
Perflex Polyaspartic Tile Grout P-30 is suitable for bonding, filling and beautifying the joint of ceramic tile, marble and stone building materials such as ceramic tile floor, ceramic tile wall, washbasin, bathtub, toilet, kitchen table, door-crossing stone, etc. Especially P-30 is the best choice for balcony, roof, etc outdoor grouting.
1. After the mortar solidified, the ceramic tile crevice must be cleaned, the impurities and dust in the ceramic tile crevice must be cleaned up with wallpaper knife and vacuum cleaner.
2. Use cleaning wax on both sides of the gap beforehand with proper amount, pay attention not to wipe wax into the gap.
3. Twist the tube cap, install it on the head of the double-tube sealant, cut the spiral rubber nozzle obliquely at the head by 45 degrees (the opening size depends on the size of the tile seam), and then install it in the rubber gun.
4. Extrude about 20 cm colloid (in order to mix it fully and remove bubbles), then inject the glue into the crevice of ceramic tile.
5. Press the ready glue on the crevice with with the seam press or steel ball.
6. After 4-24 hours (depending on the temperature), the glue cures completely, scrape off the excess glue on both sides of the gap with a scraper.
Tile Size Dosage | 1MM Gap Width | 1.5MM Gap Width | 2MM Gap Width | 2.5MM Gap Width |
(sq.ft/pc) | (sq.ft/pc) | (sq.ft/pc) | (sq.ft/pc) | |
31.5*31.5 in | 274.5 | 228.2 | 213.1 | 152.8 |
15.7*31.5 in | 204.5 | 172.2 | 161.5 | 114.1 |
23.6*23.6 in | 204.5 | 172.2 | 161.5 | 114.1 |
19.7*19.7 in | 172.2 | 143.2 | 134.6 | 95.8 |
11.8*23.6 in | 153.9 | 129.2 | 118.4 | 85.0 |
15.7*15.7 in | 137.8 | 114.1 | 107.6 | 76.4 |
11.8*11.8 in | 102.3 | 86.1 | 80.7 | 66.7 |
7.9*7.9 in | 68.9 | 58.1 | 53.8 | 37.7 |
3.9*3.9 in | 34.4 | 29.1 | 26.9 | 19.4 |
2.0*2.0 in | 17.2 | 14.0 | 11.8 | 9.7 |
400ml per plastic cartridge, 20 Cartridge per carton.
12 months if the product is stored in a dry and cool place away from light.
담당자: Laura
팩스: 86-731-83307125